Characteristics description of the LED Industrial Lights:1) Uses tow powerful LED(50W80W) as the light source , using our
proprietary LED encapsulation.
2) Utilizes the special design of multichip single module. Imported
high brightness semiconductor chips.
3) Integrative design for heat sink and housing; The LED is closely
connected to the surface. The heat from LED is removed through the
heat dissipation wing and also by the air ventilation. The design
ensures a 50,000 hours life-span for the LED. If it works 12 hours
per day, it can work over 10 years.
4) The maintenance charges are much lower than other street lights.
5) The die-casting aluminium alloy housing is effective in
waterproofing and dust prevention. It also helps in removing the
heat properly. The surface of the light is specially treated, so it
is able to bear an ultraviolet ray and resist to corrosion. The
whole light meets the standard of IP65.
6) Uses monomer ellipse reflector with spheroid cambered surface so
it can control the LED light pertinently in a needed area. This
special design can improve the uniformity of the light and the
utility ratio of the energy used.
7) Compared with traditional sodium lights, it can save electricity
more than 70%.
8) No ill glare; no abrupt and frequent flashes. The design ensures
that bad glare is eliminated,vision fatigue and disturbance aroused
by traditional streetlight and also can improves the safety of the
driving.
9) No delay start; no waiting. It can reach its normal light as
soon as it is turned on. And avoid the long time start process of
the traditional lights.
10) Environment friendly. Does not have lead, hydrargyrum, and any
other contamination. No pollution to the air.
11) It’s an excellent partner of the Solar panel system. It can
exert many merits such as working with direct current and lower
voltage. It is power saving and environment friendly. The
connection of the solar panel and LED light sources provide high
reliability.
Mail technic parameer&index:DF-764-150W led street light Main Technical Parameters
| Input Voltage | AC85V～265V |
| Freqency Range | 50Hz～60Hz |
| Total Harmonic Distortion | ≤ 9 % |
| Power Factor | ＞0.9 |
| Power Efficiency | ＞87 % |
| Working Voltage | DC30～36V |
| Led | 2 pcs |
| Led Consumption | 136 W |
| System Consumption | 156 W |
| Led Luminous Efficiency | 60～100LM/W |
| Led Initial Flux | WW | 11000LM |
| PW | 12000 LM |
| CW | 11600 LM |
| lamp’s Efficiency | ＞91 % |
| Average Illuminance | （Height）8 M | ＞33.5 Lux |
| （Height）10 M | ＞30.1 Lux |
| （Height）12 M | ＞28.2 Lux |
| Illuminance Area | （Height）8 M | 28*12 M |
| （Height）10 M | 32*13 M |
| （Height）12 M | 36*15 M |
| Illuminance Uniformity | ＞0.4 |
| Color Temperature | WW | 2700K～3900K |
| PW | 3900K～6000K |
|
